Elektronica Stynus
 

AMA-16 Mill CNC Conversion

A while ago I decided to convert my AMA-16 milling machine to cnc. For this machine I bought some stepper drivers to save the time of building them myself. I have mounted these drivers together with some power supplies and relays in a control box. Unfortunately I have not made many pictures during the build process.

 

Pictures:

http://www.elektronicastynus.be/image/84/1312048735.jpg

(Clickable)
http://www.elektronicastynus.be/image/84/1312048751.jpg

http://www.elektronicastynus.be/image/84/1312048741.jpg

 

Bottom side vent openings:

http://www.elektronicastynus.be/image/84/1312048738.jpg

There are 3 ventilation openings on top. I protected these with air filters to keep out the dust.

 

The stepper motors are connected to the control box via speakon connectors:

http://www.elektronicastynus.be/image/84/1413720048.jpg

http://www.elektronicastynus.be/image/84/1413720074.jpg

 

Interface board:

http://www.elektronicastynus.be/image/84/1312048745.jpg

 

On/off switch

http://www.elektronicastynus.be/image/84/1413399817.jpg

http://www.elektronicastynus.be/image/84/1413399822.jpg

http://www.elektronicastynus.be/image/84/1413399827.jpg

Control circuit:

 

Sensor, power and control inputs:

http://www.elektronicastynus.be/image/84/1413720068.jpg

 

I have mounted a touchscreen to the front of the control box.

http://www.elektronicastynus.be/image/84/1413400476.jpg

 

More info will follow in a future update.

Top


Comments

comments powered by Disqus

Top

© 2002-2017 Elektronica Stynus.
Valid XHTML 1.0